High Speed Tubular Type Copper and Aluminum Cable or Wire Making Stranding Machine 10%off

High Speed Tubular Type Copper and Aluminum Cable or Wire Making Stranding Machine 10%off

This high speed machines mainly used for stranding copper wire,aluminum wire, steel wire,ACSR and wire rope.Accompanied with taping head,it can used for insulation cores and some control cable stranding process.

Application:
This high speed machines mainly used for stranding copper wire,aluminum wire, steel wire,ACSR and wire rope.Accompanied with taping head,it can used for insulation cores and some control cable stranding process.
Component:
Central pay-off. cage host,taping device (optional),capstan,take-up and traverse device,and electric control system.

4.2.1 Pay-off reel in cage: PND630

4.2.2 Bobbin width: 475mm

4.2.3 Max rotating speed: 450r/min

4.2.4 Drive motor power: 45KW (AC)

4.2.5 Wire reel tightening mode: pneumatic tightening

4.2.6 Wire break protection: touch type

4.2.7 Tension form: mechanical friction

4.2.8 Bearing mode: large bearing type

4.2.9 Structural form: the main engine barrel adopts a 3+3 two-part layout. The rear end, middle and outlet ends of the barrel are supported by bearings. The middle large bearing adopts a new type of oil air lubrication and labyrinth seal.

4.2.10 Driving mode: driven by AC motor by a separate 45kw motor, the motor's built-in encoder independently. The encoder data is fed back to the control system, and the PLC coordinates and controls the operation of the whole machine.

4.2.11 Manufacturing process of cylinder: the cylinder is made of thick wall steel pipe, which is cut by the CNC intersecting line cutting machine as a whole, annealed in a large annealing furnace to enhance the mechanical performance, and then finished by a large machine tool as a whole. The drum lifting shall be subject to the dynamic balance validation by the dynamic balancer. After the overall assembly, the on-site automatic balancer shall measure the vibration value and dynamic balance value during operation to ensure the operation stability.

4.2.12 The wire reel frame adopts an end shaft structure, which is CNC cut from high-quality sheet metal

4.2.13 Loading reel mode: through the lifting device in the workshop. pneumatically clamped and loosened, and has a pneumatic mechanical locking protection device. When the wire reel frame is supplied with air, the locking protection of the wire reel can be opened and the wire reel thimble device can be opened in turn; After the air is cut off, the wire reel shall be tightened and the pneumatic locking protection device shall enter the locking state in turn. The whole operation process is fast, efficient, safe and convenient. A cable tray bracket is added to the cradle base.

4.2.14 Pay-off tension: mechanical friction is used to provide tension, and the tension is adjusted manually.

4.2.15 Passing wire method: a set of passing wire rollers at outer of cylinder,Tungsten steel mold, effectively avoid wire core scratches

4.2.16 Large bearing oil lubrication system: the middle large bearing adopts a new thin oil lubrication system,High temperature overload shutdown protection and lubricating oil insufficient supply alarm function. After the alarm, the whole machine will automatically stop and brake, and the alarm prompt will be displayed on the human-machine interface. An air cooling device is added to the large bearing lubricating oil circulation system.

4.2.17 Main braking: PLC coordinates and controls the starting, stopping, inching and other actions of the main engine through the air brake, frequency converter, braking resistor, etc. to ensure the synchronization of the whole machine operation.

4.2.18 Support: The rear support seat of the main cage, the middle and the large bearing seat at the outlet end are made of gray iron cast by the lost foam process. They are of the same type, fully absorbing vibration, reducing noise, and have a beautiful appearance.

4.2.19 Single wire pre-former device included

4.2.20 Base: the cylinder is installed on the overall welding base, which is made by special platform, and then processed by the gantry plane. It is easy to install and has high levelness.

4.2.21 Wire break protection: a touch type wire break stop protection device is provided, which can stop and brake the whole machine in time when the wire is broken or finished

4.2.22 Protective cover: push and pull cover

FAQ
1.Q: Where is your factory located? A: Our factory is located in HEJIAN CITY, HEBEI PROVINCE, CHINA,
we are near Beijing, Tianjin and Shijiazhuang air port, and CANGZHOU WEST high-speed railway station.
2.Q: What is the advantage about your company? A: Our company has skilled technical engineer and workers and professional production line.
3.Q: Why should l choose your products? A: We are direct manufacturer, we can ensure the stable product quality and provide in time service.
4.Q: The logo and the color can be customized? A: Yes
5.Q:What's your near sea loading port: Tianjin port